800 m2 of retail space in Anzegem
12,000 products in stock
professional service
pay safely
Relay Wireless 24V (1 channel) + remote control
Limited stock
Ref.: 03409925
"A wireless relay-controller for 12V with a 1-channel / output, 433mhz. The 3 built-in functions give you many possibilities. The controller has a learn-function, so that you can register multiple remotes to the same controller. It is possible, for example to have multiple remotes for one controller, but also possible to have the same remote for multiple controllers - max 8 can be programmed at the same time. Protected remote is ready for use, battery is already mounted. You can easily change the battery when this is needed. There is a jumper inside the relay, that can be placed in three ways (left, right or no jumper). It is the placement of this jumper that decides in what way the relay operates. The three functions can be seen below: Toggle: Push button A for turning on, push A again for turning off. Latch: Push button A for turning on, push B for turning on. Momentary / push-on: Only on when button A is pushed down. The learn-button is used to register the ID of the remote in the controller. When you push the learn-button - a yellow LED will turn on, afterwards you can push the wanted button on the remote. The LED will flash and the ID has been saved. To reset the controller, simply push and hold the learn button until the LED flashes. Connecting Each relay output is marked with A and C, while the relay input is marked with B. Using normal relay designations, A is ""NO"" (normally open) while C is ""NC"" (normally closed). You can use the two outputs to get power when the relay is off or when the relay is on. You can also use both. • Dimension on controller:
