Motip Leather Spray GREY 200ml - MOTIP
14,73 EURVAT included (12,17 VAT excl.)
Limited stock
Ref.: 03402315
MoTip Leather Paint aerosol is a high-quality color lacquer to paint leather. This leather paint from MoTip dries quickly and remains flexible and elastic, even after complete drying. The MoTip leather paint is of professional quality, so that the color and shine remain beautiful for a long time while retaining the original structure of the leather. MoTip leather dye can be used universally for multiple applications. You can use the Leather Paint spray not only to paint a leather sofa or chair brown, but also to spray a dashboard, to give floor mats, carpet or carpet a new color and to paint the interior trim of doors. Do you want to spray the leather paint in the color? Then make sure that you apply the lacquer in thin layers so that the leather dye dries satin matt. With thicker layers of paint, the gloss level increases slightly, making the leather paint shiny. Use the step-by-step plan below to properly spray the brown leather paint. Before you start painting leather, make sure the surface is clean, dry and free of grease. Make sure the environment in which you spray is between 15 and 25 degrees Celsius. Shake the aerosol well for at least 2 minutes so that the paint is well mixed. Lightly sand the leather to be sprayed with P400 or P600. Always spray a test piece before you start! Choose an inconspicuous place for this. Keep a distance of 25 to 30cm from the surface when spraying. Spray the leather paint in several thin layers. Keep shaking the aerosol between the spray layers! This is very important for the quality and the spray pattern. Ready to spray? Turn the spray paint upside down and spray the valve until only propellant comes out. Features MoTip Leather Paint spray High-quality leather paint Long-lasting color retention Dries satin matte Quick-drying leather paint Remains elastic and supple Good adhesion Keep the original structure of the leather Drying time leather dye: Dust-dry: after 10 minutes at 20°C Completely dry: after 2 hours at 20°C Please note, the drying time is influenced by layer thickness, temperature and humidity Heat resistant up to 50°C Yield: approximately 1m2