GENERATION 2 Ledson Commander Gen2 lets you switch on and off LED bars, auxiliary lights, work lights, etc. and turn on and off other devices at the touch of a button! 2nd generation Commander is now upgraded with a memory that remembers your settings even after you turn off the ignition/vehicle. Ledson Commander lets you switch on and off LED bars, auxiliary lights, work lights, etc. and turn on and off other devices at the touch of a button! Programmable control panel with 8 individual outputs, controls up to 8 units separately or together. A control with RGB selectable backlight included (with 2.5 meter cable) but you can also use a free app for Android or Apple. Ledson Commander has a direct input (yellow cable) to be able to control the LED bar/auxiliary lights etc via the vehicle's analogue high beam signal/high beam bulb. 12V / 24V with MosFet / electronic relays, app support for control via Bluetooth, protection against overheating, overload, short circuit and polarity protection. Included: Relay box with remote control, battery wiring, fuses, 50 different symbols / stickers to attach to the remote control, bracket with screws for relay box and remote control, assembly instructions. Ledson Commander makes everyday life easier. With the controller you can effortlessly command different devices. The areas of use are limited only by your imagination as you can control all electrical devices from 12V to 24V. Connect and command up to eight different outputs with Commander. It can control lighting devices such as auxiliary lights, work lights, side markings and warning lights, but also other devices such as coffee makers and microwaves. The devices can be managed either separately or synchronized. For example you can choose to have synchronized control for all lighting on a vehicle, depending on the result you are looking for. An unique feature to the Commander is that it can easily be connected to an app through Bluetooth. This way, you can control all devices directly from your phone, which makes it easier to turn devices on and off when being outside the vehicle. Commander is very versatile which means that it can be used for several different vehicles such as cars, LCVs and trucks. The fact that it can control several different types of devices at the same time is an advantage especially for vehicles such as mobile homes and caravans that, in addition to lighting, also have other electrical equipment. Installation of Commander is simple and quick which means that a little investment of time yields many areas of use and benefits. More information: 1. Max total current: 60A (720W at 12V). 2. 8 individually programmable switches. 3. The maximum total current of this device is 60A. 4. Maximum current per output at 12V: - Output fuses 1 and 5 is 30A - activated when yellow cable receives power - Output fuses 2 and 6 is 20A - Output fuses 3 and 7 is 10A - Output fuses 4 and 8 is 5A - If the output has been overloaded, a red LED will indicate next to the blown fuse 5. The maximum power of an output should not be more than 300W (25A @ 12V) 6. Built-in Bluetooth for app control. 7. Protection against overheating, overload, short circuit, polarity protection. 8. Direct high beam control to circuit 1 and circuit 5. 9. Programmable icons. 10. Backlit switches with selectable backlight color. 11. LED indication for overload/broken fuse. 12. Each switch can be programmed for three different functions: - Switch between On/Off - Switch between On/Off as long as the button is pressed - Strobe function